LG UltraGear 24GQ50B Bedienungsanleitung Seite 16

• [Six Color]: Meets the user requirements for colours by adjusting the hue and saturation of the six colours
(red, green, blue, cyan, magenta, and yellow) and then saving the settings.
- Hue: Adjusts the tone of the screen colours.
- Saturation: Adjusts the saturation of the screen colours. The lower the value, the less saturated and brighter
the colours become. The higher the value, the more saturated and darker the colours become.
•
[Black Level]: Sets the offset level (for HDMI only).
Offset: as a reference for a video signal, this is the darkest colour the monitor can display.
- [High]: Keeps the current contrast ratio of the screen.
- [Low]: Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
•
[DFC]
- [On]: Adjusts the brightness automatically according to the screen.
- [Off]: Disables the DFC feature.
•
[Picture Reset]: Returns picture and colour to the default settings.
16
[Input]
[Menu] > [Input]
• [Input List]: Selects the input mode.
•
[Aspect Ratio]: Adjusts the aspect ratio of the screen.
•
[Auto Input Switch]: When [Auto Input Switch] is set to [On], display will automatically switch to new input
when connected.
[General]
[Menu] > [General]
•
[Language]: Sets the menu screen to the desired language.
•
[User-defined Key 1]/ [User-defined Key 2]: You can customize the main menu to access your preferred menu
easily. [User-defined Key 1] and [User-defined Key 2] appear at the left/right of the main menu.