Konig Electronic HAV-IR10-11 Anleitung Seite 3

To setup the internet radio by using the Internet Wizard:
1. Select the "Wizard" in the Internet Setup.
2. Select the WLAN region in which the radio is located.
3. The Wizard will automatically scan for all available Wi-Fi and wired (Ethernet)
networks.
4. Select your desired network by the rotary control key. There are three special
options:
• [Rescan] Rescan for all possible network;
• [Wired] Available when the wired Ethernet is available.
• [Manual confi g] Set up the wireless confi guration manually.
5. If there is only one unlocked network available, the radio will automatically connect
to that network. The display will show "Connected" after the radio has successfully
connected to the internet.
6. If the network is a secured network, please provide your password to connect to
the network.
Please refer to the below:
Choose the '<' symbol = back space
the ' ' symbol = enter
the 'C' symbol = cancel
7. Users can edit their Wi-Fi settings by selecting the System setup
Manual settings.
8. Selecting View settings allows you to access other Wi-Fi connection settings.
These are :
• Active adapter, which displays the current connection being used to connect to the
Internet (WLAN or Wired),
• MAC address,
• DHCP status
• PC settings
• SSID
• IP settings, which displays the IP address, the subnet mask and the gateway
address.
All manuals and user guides at all-guides.com
3
Internet setup