Deye SUN-MI-RELAY-01 Bedienungsanleitung Seite 9

R
Status
Wizard
Quick Set
Advanced
Upgrade
Restart
Reset
�. Klicken Sie, um die „Status"-Seite aufzurufen. Die aktuellen Verbindungsinformationen können
Sie unter „Device information" einsehen. Wenn Sie Hilfe benötigen, wenden Sie sich bitte an den
offiziellen Kundendienst von Deye oder einen autorisieren Serviceanbieter.
Status
Wizard
Quick Set
Advanced
Upgrade
Restart
Reset
Setting completel Please close tis page manually!
Please login our management ponal to monitor and manage
your PV system.(Please register an account if you do not have
one.)
To re-login the configuration interface, please make sure that
your computer or srnart phone and our device are in the same
network sqy ent, and enter the new IP address of the dovice
to access the interface.
Inverter information
Inverter serial number
Firmware version(main)
Firmware version(slave)
Inverter model
Rated power
Current power
Yield today
Current power
Alerts
Last updated
Device information
Device serial number
Firmware version
Wireless AP mode
SSID
IP address
MAC address
Wireless STA mode
Router SSID
Signal Quality
IP address
MAC address
Remote server information
Remote server A
Remote server B
Web Ver:1.0.24
����������
LSW�BLE_MW��_����_RELAY_����.��
Enable
RE_����������
��.��.���.���
��:�A:�F:B�:��:�F
Enable
AP_����������
���%
��.��.���.���
��:�A:�F:B�:��:�F
Not connected
Not connected
9/9
中文 English
Help
Note: The IP address of
the device may have
changed, please refer to
User Manual to check
the procedures to obtain
the new IP address.
中文 English
Help
The device can be used as
a wireless access point(AP
mode) to facilitata users to
configure the device, or it
can also be used as a
W
wireless information terminal
(STA mode) to connect the
W
remote server via wireless
router.
kWh
kWh
Status of remote server
Not connected: Connection
to server failed last time.
If under such status, please
check the issues as follows:
(�)check the device
information to see whether
IP address is obtained or
not;
-D� (�)check if the router is
connected to internet or not;
(�)check if a firewall is set
on the router or not;
Connected: connection to
server successful last time;
Unknown: No connection
to server.Please check
again in � minutes.