Deye SUN-MI-RELAY-01 Bedienungsanleitung Seite 7

R
�. Der Browser springt zur Seite „Status", auf der die grundlegenden Informationen aufgeführt
werden.
Status
Wizard
Quick Set
Advanced
Upgrade
Restart
Reset
�. Klicken Sie auf „Quick Set", um die Einstellungen aufzurufen. Klicken Sie nun auf „Search
", um mit der Suche nach Netzwerk-Hotspots in der Nähe des SUN-MI-RELAY-�� (Netz- und
Anlagenschutzgerät) zu beginnen.
Status
Wizard
Quick Set
Advanced
Upgrade
Restart
Reset
Inverter information
Inverter serial number
Firmware version(main)
Firmware version(slave)
Inverter model
Rated power
Current power
Yield today
Current power
Alerts
Last updated
Device information
Remote server information
Network name (SSID)
(Note： case sensitive)
Encryption method
Encryption algorithm
Password (�-�� bytes)
(Note: case sensitive)
Obtain an IP address automatically
IP address
Subnet mask
Gateway address
DNS server address
Note: After clicking Save, the system will restart immediately.
Web Ver:1.0.24
WPA�PSK
AES
Enable
��.��.���.���
���.���.���.�
��.��.���.���
Save
7/9
中文 English
Help
The device can be used as
a wireless access point(AP
mode) to facilitata users to
configure the device, or it
can also be used as a
wireless information terminal
(STA mode) to connect the
remote server via wireless
router.
W
W
Status of remote server
kWh
Not connected: Connection
to server failed last time.
kWh
If under such status, please
check the issues as follows:
(�)check the device
information to see whether
IP address is obtained or
not;
(�)check if the router is
connected to internet or not;
(�)check if a firewall is set
on the router or not;
Help
In this page, you can click
the "Search" button to
Search
automatically search for
nearby wireless access
point, and connect your
device to it by setting the
network parameters.
★Note: If you haven't set
this kind of device before，
please follow the setup
wizard.
★Note: After clicking
Save, tho system will
restart immediately.
You need to re-login the
configuration interface
after restart.