Spare Parts; Accessories; Technical Data - Seliger 320L Gebrauchsanleitung

MAINTENANCE
The pump fi lter should be cleaned at regular intervals.
To do this, unplug the device from the mains, remove the front of the pump and
clean it under lukewarm water. (Fig 3)
Fig 3
Fig 4
EXCHANGING THE HALOGEN LAMP
Pull the Transformer from the socket and wait until the Halogen lamp cools.
Take the halogen lamp out of the water. Dry the halogen lamp completely before
removing the glass head-piece.
Attention: Do not touch the bulb with your fi ngers, use a soft cloth.
Pull the defective bulb out of the lamp holder and change it for a new one
(12V G4 / max 10W).
Insert the Halogen light with base in the glass head-piece until it fi ts correctly.
The halogen lamp is now closed completely and can be returned into the water.
12 ENGLISH
All manuals and user guides at all-guides.com
(Fig. 4)

SPARE PARTS

Spare bulb 10W, 2er-Set
Spare glass for lamp
Pump with lighting(without transformer)
Transformer
Set of 3 adapters
Switch

ACCESSORIES

Set of 4 colour elements for lamp(red, blue, yellow, green)

TECHNICAL DATA:

Pump
Input: 12V /50 Hz
Watt: 4
Lamp
Input: 12V /50Hz
Transformer
Input: 230V~ /50Hz
Protektion: Protected against overheating and overcharge.
Produced: DIN EN 60742
40131
40146
40382
40361
40377
40366
40147
H maximum: 55cm
max l/h: 320
Watt: max 10
Output: 12V /1200mA
ENGLISH 13