Safety Instructions; Initial Operation - Seliger 320L Gebrauchsanleitung

SAFETY INSTRUCTIONS

Please heed the following safety instructions when using the seliger
• Before carrying out any work on the pump remove the plug from the
mains and turn off the current supply of all electrical devices which are
in the water.
• The pump may only be used indoors (dry rooms) for indoor fountains
and aquariums.
• If the pump, the cable or the mains adapter show signs of mechanical
damage the device may no longer be used.
• The seliger 320L pump may only be plugged into an earthed socket.
®
• Maximum water temperature 35 °C .
• To avoid residual lime-scale we recommend using distilled water.
TIPP: regiles water-fi lter system (Art. 59000), the right accessory for
®
all fountains, softens and decalcifi es the water and assures long life span
of the product.
• Only use original spare parts from seliger
• The pump must always be completely covered with water and must not
be operated without water.
• The device is not a toy, please follow the safety instructions.
The pump must not be operated in bathtubs or swimming pools. The device must
be unplugged for cleaning and adjusting work to be carried out.
We accept no liability for damage caused by not following the safety instructions
or for any damage to plants and animals.
10 ENGLISH
All manuals and user guides at all-guides.com
320L pump:
®
.
®

INITIAL OPERATION

Put the pump in place in the indoor fountain or aquarium. You can connect the
pump directly or using the included adapters to a fl exible hose or rigid pipe.
(Fig.1)
The required water quantity can be adjusted on the front of the pump. Fill with
enough water to cover the pump completely. Connect the cable to a suitable
mains socket. (Fig. 2)
Fig. 1
Fig. 2
Remove before use!
pump on -
off -
pump on / light on -
ENGLISH 11