cecotec ENERGYSILENCE 600 WOODDESK Bedienungsanleitung Seite 12

ESPAÑOL
9. COPYRIGHT
Los derechos de propiedad intelectual sobre los textos de este manual pertenecen a CECOTEC
INNOVACIONES, S.L. Quedan reservados todos los derechos. El contenido de esta publicación no
podrá, ni en parte ni en su totalidad, reproducirse, almacenarse en un sistema de recuperación,
transmitirse o distribuirse por ningún medio (electrónico, mecánico, fotocopia, grabación o
similar) sin la previa autorización de CECOTEC INNOVACIONES, S.L.
22 ENERGYSILENCE 600 WOODDESK
ENERGYSILENCE 610 STEELDESK
ENERGYSILENCE 620 RETRODESK
1. PARTS AND COMPONENTS
Fig. 1
1. Front grille
2. Blade fixing nut
3. Blades
4. Back grid fixing nut
5. Back grille
6. Shaft
7. Air oscillation button
8. Speed control dial
9. Motor
10. Cord
11. Fan support
12. Base
13. Base tightening nut
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. ASSEMBLY
- Remove the nut and the back grid fixing nut by turning anticlockwise both of them, then
remove the two pieces.
Assemble the back grid so that it is facing upward.
-
ENGLISH
ENERGYSILENCE 600 WOODDESK 23
ENERGYSILENCE 610 STEELDESK
ENERGYSILENCE 620 RETRODESK