For Your Information; General Information - Vigor Equipment V2481 Betriebsanleitung

For your information

1. General information

• Please ensure that tool users have carefully read these operating instructions and fully
understand all information given before the tool is used.
• These operating instructions contain important advice that is necessary for the safe and
trouble-free operation of your VIGOR tool.
• For appropriate use of the tool, it is essential that all safety and other information in these
operating instructions is adhered to.
• For this reason, always keep these operating instructions together with your VIGOR tool.
• This tool has been designed exclusively for specific applications. VIGOR wishes to
emphasise that any modifications to the tool and/or use of the tool not in line with its
intended application is strictly for bidden.
• VIGOR does not accept any express or implied warranty or liability for any injuries to persons
or damage to property caused by improper application, misuse of the tool or a disregard
of the safety instructions.
• Furthermore, the accident prevention and general safety provisions relevant
for the application range of this tool must be observed.
2. Liability and express or implied warranty
• Any deviation from the intended use and/or any misapplication of the tool is not permitted
and will be considered as improper use.
• Any claims against the manufacturer and/or its authorised agents resulting from damage
caused by improper use of the tool are invalid.
• Any personal injury or material losses caused by improper use of the tool
are the sole responsibility of the owner.
3. Spare parts
• Use only the manufacturer's original spare parts.
• Unsuitable or defective spare parts may cause damage,
malfunction or total failure of the tool.
• The use of non-approved spare parts will void all warranty,
service and liability claims as well
as all claims for compensation against the manufacturer or its
agents, distributors and sales representatives.
4. Disposal
• For disposal, clean the tool and disassemble in accordance with the regulations
for work safety and environmental protection. Components can be recycled.
• Metal components can be scrapped.
VIGOR GmbH
[ +49 (0) 21 91 / 97 95 •
• ; Am Langen Siepen 13-15 • 42857 Remscheid • Germany
\ +49 (0) 21 91 / 97 96 00 • ] info@vigor-equipment.com • ^ vigor-equipment.com