Panel Description - Beamz Light Package 2 Multipoint Laser G-50mW R-80mW Gebrauchsanleitung

INSTALLATION
This fixture has been designed to be hung. It is recommended for safety purposes, your lighting effect are properly mounted
using a suitable hanging clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from
your lighting vendor.
International laser safety regulations require that lasers must be operated in the fashion illustrated below, with a minimum of 3
meters of vertical separation between the floor and the lowest laser light vertically. Additionally, 2.5 meters of horizontal
separation is required between laser light and audience or other public spaces.

PANEL DESCRIPTION

1. LASER APERTURE
2. POWER INPUT: 5VDC power input is used to connect the AC/DC adaptor.
3. MICROPHONE
4. MOTOR SPEED CONTROL: Regulating the speed of the motor
5. MODE SWITCH: FUNCTION SWITCH: 2= Strobo flash (adjust), 1=ON, 4=OFF, 3=Voice controller
FAN on top of the laser: Used to cool the components inside the enclosure. Never cover this fan outlet!
HANGING BRACKET: 2 screws on both sides to fasten the unit and a mounting hole to fix on a stand or wall.
—5—