GIS TS-MX300-AC Bedienungsanleitung Seite 16

TS-MX300-AC
(134,2 kHz System)
Transfer data to and from MX300
To transfer data the built in Bluetooth interface is used.
At the counterpart (the Windows PC) also a Bluetooth interface is needed. This can be either
internal or be added using a so called "Bluetooth Dongle".
First of all the Bluetooth interface has to be activated at MX300. This can be done either
temporarily using "Bluetooth – On" in main menu or the Bluetooth interface is durably activated
in "Settings – Bluetooth". Also in "Settings – Bluetooth" the device name and password, which
are needed during pairing in windows, are defined..
The activation of the Bluetooth interface can be seen in the display immediately. At top left the
Bluetooth symbol is shown in gray as soon as the device is ready to be connected. If connection
is established, the symbol is shown in blue.
Please respect also the handbook of TS-MX300 Explorer where the connection establishment is
described.
GiS Gesellschaft für Informatik und Steuerungstechnik mbH * Tel: +49 (0)7026-606-0 * Email: rfid@gis-net.de
All manuals and user guides at all-guides.com