Inhaltsverzeichnis
Werbung
Max Gain – The booster's highest gain that is set by the factory.
Working Gain – The current gain measured while the booster is working under different conditions. When the Input signal is
weak, the booster will work with at the max gain, but when the device detects too much strong input signal, it will automatically
reduce the gain to avoid self-oscillation of the system.
Reduced Gain – This value indicates how much the gain has been reduced according to the input signal strength.
This message means that the outdoor signal detected by the booster is not good enough.
Solution 1. Check if the external antenna is connected firmly to the BS port. Make sure the external cable is not damaged.
Solution 2. Direct the external antenna to provider's nearest base station. Solution 3. Change the position of the external
antenna. Try to put it as high as possible.
Solution 4. Check and make sure the booster you installed matches the frequency bands that your mobile provider(s) operates in
your area.
Werbung
Inhaltsverzeichnis
