Inhaltsverzeichnis
Werbung
2. After the device finishes starting up, the main screen with signal readings will be displayed.
G9 – 900 MHz signal
D18 – 1800 MHz signal
W21 – 2100 MHz signal
I - Input signal that the device receives from outdoors. This value is always measured as negative with the sign "-" .
O – Output power. Can be negative with "-" or positive with "+".
Note: For optimal performance of the booster, the Output power must be positive.
AGC – Automatic Gain Control. "√"means function activated, system working properly. "×"Automatic Gain Control failed, system
needs adjustment.
OSC – Anti Oscillation function. "√"means function activated, system working properly. "×"Anti Oscillation function failed,
system needs adjustment.
3. Use UP and DOWN buttons to switch the screen pages.
Werbung
Inhaltsverzeichnis
