Maintenance And Storage - Auvon AS8012C Bedienungsanleitung

Support@iauvon.com

8.MAINTENANCE AND STORAGE

1. Unplug the output cord from the output jack of the
controller after using.
2. Cover both pads with the protective film before storage.
3. Never fold the massage pads.
4. To keep the controller clean, use a soft and dry cloth
UK
for dust or a soft damp cloth for any dirt and smudges. Do
not use any cleaning solutions to clean the controller and
its pads.
5. Never apply the pads on any surface other than your
skin. If the pads become soiled or dirty, the adhesive power
may decrease. In this case, moisten the surface of the pads
with water and wipe away the dirty portion. This will allow a
temporary restoration of the adhesive power. However, too
much water will result in loss of the adhesive power.
6. Do not use or store the devices where there are
magnetic fields or electric wave (near TV set or speakers).
7. Do not place the devices in areas of high temperature,
high humidity, or under direct sunlight.
8. Keep the device out of reach of children.
9. All worn accessories should be dealt according to the
regulations.
10. Do not immerse the device in water or any liquid. Do
not drop the device or throw it from a height.
11. After using the device, please remove the electrode
and replace the protective film. Always use the protective
film when the electrode is not in use.
12. Cleaning
- Machine washing and soaking is PROHIBITED.
- Do not wash the belt in fabric softener as this can
damage the belt.
- Do not dry clean.
28