DoorBird A1071 Serie Installationsanleitung Seite 10

stability and quality of your network components, such as your Internet router
and WiFi access points or WiFi repeaters. Please also make sure that your net-
work components are not older than two years, have been manufactured by a
well-known manufacturer, and have the latest firmware installed.
Should these requirements not be fulfilled, it may happen, for example that
the performance of audio and video is poor or push notifications are delayed
or do not arrive on your smartphone or tablet at all.
Requirements:
High-speed Internet (via landline): DSL, cable or optical fibre
Network: 802.11 b/g/n 2.4 GHz or Ethernet, with DHCP
STEP 1: SWITCHING OFF POWER
Switch off the power to all wires leading to the assembly location, i.e. the
door station, door chime, electric door opener, power supply unit, PoE-Switch/
PoE-Injector etc..
STEP 2: DETERMINING THE ASSEMBLY LOCATION
The Sender and Receiver are IP50 certified (not water-proof). Please make sure
to put them into an appropriate housing if you want to use them outdoors.
PoE +
Ethernet data
The 2-wire cable between the Sender and Receiver are limited to maximum
length of 80 meters/262 feet.
10 10
PoE +
Ethernet data