MOTORBLINDS CMD-02-P Gebrauchsanweisung Seite 14

Recharge the blind
To charge the blind, connect it to a standard USB-C 5V power supply via a USB-C cable.
This can be your iPhone's power adapter, for example.
LED light flashes
red during operation;
Charge the battery
14
Reset the blind
Resetting the blind results in deleting the end positions and connections of the blind with apps
and remote controls. Shortly press the program button to activate program mode. The blind will
start stepping up and down.Hold the reset/program button for at least 20 seconds to reset the
blind. The blind will stop stepping twice. After the second stop, the blind will give one extra step
to indicate that is has been reset.
LED light flashes
green;
battery is charging
Short press
+
LED light constantly
green;
battery is fully charged
5 x
20 s