Installing An Additional Soundbar When Samsung Wireless Speakers Are Already In Use - Samsung HW-MS550/X Vollständiges Handbuch

Installing an additional Soundbar when Samsung wireless speakers are already in use

1. On the Home screen of the Samsung Multiroom app, select Settings (
select "Add Speaker".
2. To connect the Soundbar to 2 Samsung wireless speakers and configure a surround sound system,
follow the steps shown below. (You cannot set up a surround sound system using one audio device
and one Soundbar.)
X Touch to go to the list of all speakers.
Y Touch on the right of the Soundbar model name.
Z Touch Surround Setup. Select Done after dragging the speaker to the desired location.
[ The Surround connection is complete.
Soundbar
NOTE
• To connect an additional SWA-9000S (not supplied), disconnect the Samsung wireless speakers
from the Soundbar to disable the surround sound system. (If connecting the surround speakers
without disconnecting SWA-9000S, sound is played via both the Samsung wireless speaker and the
Surround speaker.)
ENG - 21
) at the top, and then