Absima CR3P Bedienungsanleitung Seite 7

12.03 MODEL
Function explanation:
The radio control store with ten di erent
memories, and each memory in the radio can be
setup separately to match up with di erent models.
Parameter speci cation:
The initial model No. is Model "NO. 0".
ACB is for the name of model, the initial data is "FSO".
Operation:
Switch on the transmitter and press the "ENTER" button to be ready for
choice, then turn to the left or right to choose the model you want
12.04 NAME
Function explanation:
This function allows you to assign a number to each
model memory and a user name (three characters).
Parameter speci cation:
MODEL No: Model number
ACB: User name
Operation:
Press the "ENTER" button and turn it to select the name option.
Press the "ENTER" button once more, the rst letter will be blinking.
Turn the "ENTER" button to select a letter or a number.
12.05 REV
Function explanation:
This function reverses the direction of the operations
of servos: Steering, throttle, and channel 3.
Parameter speci cation:
CHANNEL: Channel number, from 1 to 3
REV: Reverse
NOR: Normal
Operation:
Press the "ENTER" button and turn to select the REV option. The
selected function will be blinking. Select the channel by turning the
"ENTER" button, and then press the "Set" button (now the "REV" or
"NOR" will be blinking).
from the menu. Then to press the "ENTER" button and enter the next
menu, meanwhile "0" will ash. At last turn left or right and con rm
the model (totally 10 sets of memories, 0 to 9).
Press the ENTER button to nish the operation after edition. Then return
to menu option.
Press "Return" button and return to the initial menu at any condition.
After this, press the "Set" button to to select the next letter. That can
be done in the same way. After nishing the setting of three letters/
numbers, press the "ENTER" button to a rm them.
Press "Return" to return to the opening sc
Turn the "ENTER" button to select "REV" or "NOR". After this, press
the"Set" button to nish the setting.
The other channels can be done in the same way. After nishing the
setting of the three channels, press the "ENTER" button to return to
the menu screen.
Press "Return" to return to the opening screen.