Werbung
Verfügbare Sprachen
Verfügbare Sprachen
G Operating instructions
CR39E USB-C™ external memory card reader
Item no.
1405814
Intended use
The product can be plugged into a computer's USB port and it is designed for reading
and writing to appropriate memory cards.
Always observe the safety instructions and all other information included in these op-
erating instructions.
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Package contents
• Card reader (with protection cover)
• Operating manual
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item num-
ber into the search field. After submitting the query you can
download displayed records.
Explanation of symbols
This symbol indicates specific risks associated with handling, operation or
use.
The arrow symbol indicates special tips and operating information.
Safety instructions
The warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any re-
sulting damage!
We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions. In such
cases, the warranty will be null and void.
• The unauthorised conversion and/or modification of the product is not
permitted for safety and approval reasons (CE). Do not open/disassemble!
• The product should be used only in dry indoor areas; it must not get wet or
damp.
• The product is not a toy and does not belong in the hands of children.
• Do not carelessly leave the packaging material lying around since this
may become a dangerous plaything for children.
• Handle the product with care; it can be damaged by impacts, blows, or
accidental falls, even from a low height.
Getting started, connection
Remove the protection cover and connect the card reader with the USB port of your
computer (the USB-C plug fits in any orientation). The computer does not need to be
switched off.
The operating system of your computer will detect the new hardware, and automat-
ically install the required drivers; they are already present in the operating system.
Inserting/removing the memory card
The card reader has in total 2 slots. The slots are directly internally intercon-
nected and cannot be used at the same time.
Insert a memory card into the appropriate slot of the card reader. Pay attention to the
correct orientation when inserting the memory card; do not use force!
If you wish to remove the memory card from the card reader (or to disconnect the
card reader from the computer), wait until all read/write accesses to the memory card
are completed. Only then you should remove the memory card from the card reader.
If the memory card is removed during read/write access (or the card reader is
disconnected from the computer), the data on the memory card can be dam-
aged. The memory card may possibly even require subsequent re-formatting.
Reading from/writing to memory cards
A memory card inserted into the card reader will be integrated in the same way as a
conventional removable media drive. For example, with the Windows File Manager
you can now read the data on the memory card (or store data on the memory card) in
the same way as you use a USB hard drive or a USB stick.
The maximum speed attainable when reading / writing a memory card depends on
your memory card.
Reminder! When writing on SD-/SDHC-/SDXC-storage media, make sure
that write protection is switched off (small sliding switch on the side of the
memory card).
Tips for SDXC memory cards
In order to use SDXC memory cards with Windows XP, an update of Windows XP is
required. Only then will the "exFat" file system of SDXC memory cards be supported.
You can download the update at www.microsoft.com. To find the update, enter the
search terms e.g."exfat windows xp" in the search bar of your Internet browser.
With Windows Vista you have to install the service pack 1 in order for the card reader
to support SDXC cards.
Newer Windows versions from Windows 7 and higher support directly the "exFAT"
file system of SDXC cards.
Maintenance and cleaning
The product is maintenance-free. Repair or maintenance work must be carried out by
a specialist or a specialist shop.
You can use a clean, dry, soft cloth for cleaning. Dust can be very easily removed with
a soft, clean brush and a vacuum cleaner.
Do not use aggressive chemical or scouring cleaning agents, as this may lead to dis-
colouration or changes in the material on the surface.
Disposal
The product must not be disposed of with the household waste.
Dispose of the product at the end of its serviceable life in accordance with
the current statutory requirements; e.g. return it to any suitable collection
point.
Technical data
Operating voltage........................... 5 V/DC via USB
USB standard.................................. USB3.0 (USB2.0/1.1 compatible)
Connector plug ............................... USB-C
Suitable memory cards ................. SD, SDHC, SDXC, microSD/microSDHC/microSDXC;
Support of SD UHS-II and microSD UHS-I
Ambient conditions ........................ Temperature 0 °C to +55 °C, air humidity 10% to 90%
relative, not condensing
Dimensions (L x W x H) ................. 34.5 x 54 x 9.5 mm (without protection cover)
Weight .............................................. approx. 14 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
Werbung
