Installation - Sharp YC-MS31E Bedienungsanleitung

IMPORTANT SAFETY INSTRUCTIONS
connection procedure.
Water vapour or drops may occasionally form on the oven
walls or around the door seals and sealing surfaces. This is
a normal occurrence and is not an indication of microwave
leakage or a malfunction.
This symbol means that the surfaces are liable to
get hot during use.

INSTALLATION

1. Remove all packing materials from the inside of the
oven cavity and remove any protective film found on
the microwave oven cabinet surface.
2. Check the oven carefully for any signs of damage.
3. Place the oven on a secure, level surface, strong enough
to take the oven weight, plus the heaviest item likely
to be cooked in the oven. Do not place the oven in a
cabinet.
4. Select a level surface that provide enough open space
for the intake and/or outlet vents.
The rear surface of appliance can be placed against a wall.
• The minimum installation height is 85 cm.
• A minimum space of 20 cm is required between the sides
of the microwave oven and any adjacent walls or objects.
• Leave a minimum space of 30 cm above the oven.
• Do not remove the feet from the bottom of the oven.
• Blocking the intake and/or outlet openings can damage
EN-14 EN-14