profi-pumpe SOLAR-DROP P25 Bedienungsanleitung Seite 3

●
You can cut the length of the black 1/8" hose yourself and then connect the hose and the T-adapter as needed;
●
Connect the T-adapter, the black 1/8" hose and the backflow prevention valve (anti-siphon valve), and pay
attention to the direction of the anti-siphon valve as shown below.
● Clean the joints with a cloth before connecting and work on a clean surface to avoid contamination. Dirt on the
connections can cause leaks.
●
The Anti-siphon valve placement must be higher than drippers.
●
Insert the necessary brackets into the floor;
●
Connect the parts as shown in the diagram on page 9, cutting the necessary pieces to the
appropriate length from the hose supplied;
●
Close the irrigation system with the plugs at the end of the hose.
●
The system can support up to 25/50 supply points depending on the model;
●
The irrigation system is now ready for use.
SOLAR-DROP P50
English 3
SOLAR-DROP P25