Setting The Temperature Unit - Anker EverFrost Powered Cooler 50 Bedienungsanleitung

Setting the Temperature
To enter the temperature adjustment mode, press the settings button until the temperature number flashes.
Press the up or down buttons to adjust the zone temperature, and confirm your temperature by pressing the
settings button again.

Setting the Temperature Unit

To enter the temperature adjustment mode, press the settings button until the temperature unit icon flashes.
Press the up or down buttons to choose between "Celsius/Fahrenheit," and confirm the unit by pressing the
settings button again.
Bluetooth
Press the settings button for 2 seconds to turn on Bluetooth. The Bluetooth icon on the screen will flash.
It will automatically connect to your phone with Bluetooth on, and the icon will turn steady white.
The Bluetooth function will be turned off after 12 hours without any connection.
11 EN
Car Battery Protection Grades
To enter the voltage level adjustment mode, press the settings button until the voltage level icon flashes. Press
the up or down buttons to choose between "L/M/H", and confirm it by pressing the settings button again.
Select "M/H" gear when the product is powered via a car. It's recommended to select "L" gear when powered
by an independent power supply.
1
2
Medium/High
1
2
When the car's battery voltage is lower than the set value without the battery, your cooler will stop working.
When the car's battery voltage is lower than the set value, the cooler switches to its own battery for power
supply. Once the car battery is restored, it switches to the car battery's power source.
The Anker App for Smart Control
You can remotely control your powered cooler using the Anker app. Please download the app and its
user manual by scanning this QR code.
Connect the device to a network before using the app for the first time. After connecting successfully,
you can connect your devices off-grid.
1
2
Low
12V
Operating voltage Start-up voltage
High 12V 12.5V
Medium 11.4V 12.2V
Low 10.4V 11.3V
24V
Operating voltage Start-up voltage
24.7V 26.1V
24.3V 25.3V
21.9V 22.9V
EN 12