Seite 1
User Manual OL 16 1310 Optisches Verteilpaket Optical Transmitter-Kit Connecting past, katalog.wisi.de present and future.
Seite 2
User Manual – OL 16 1310 Überblick / Overview OL 16 1310 Auf einen Blick / At a glance Kombiniert die SAT-Frequenzen des Breitband-LNB mit den FM- /DAB- Radio und DVB-T/T2 Signalen. Das IP65 spezifizierte Gehäuse ermöglicht eine Installation am Ort der SAT-Antenne.
Seite 3
Combines the satellite frequencies of the wide- band LNB, FM-/DAB- Radio and signals from a terrestrial antenna DVB-T/T2. The IP65 specifi ed housing ensures an installation at the dish location. 3x RF Inputs with F connector (Radio/H/V) 1x optical output with +7dBm (+-0.5 dB) power...
Seite 4
User Manual – OL 16 1310 Anschlüsse / Connections Wideband Output Vertical / Breitband Ausgang Vertikal Wideband Output Horizontal / Breitband Ausgang Horizontal...
Seite 5
Optical Output FC/PC / Optischer Ausgang Terrestrial Input F type (+12V remote feed) / Terrestrischer Eingang F Anschluss (+12V Fernspeisung) Wideband Input Vertical F type (+12V remote feed) Breitband-Eingang Vertikal F Anschluss (+12V Fernspeisung) Wideband Input Horizontal F type (+20V remote feed) Breitband-Eingang Horizontal F Anschluss (+20V Fernspeisung) Power in F-Type (+20V) / Eingang Spannungsversorgung F-Anschluss (+20V) LED Power On indicator / LED Betriebsanzeige...
Montageanleitung Koaxial Anschlüsse 1. Die mit V oder H gekennzeichneten Anschlüsse sind mit dem gelieferten Breitband LNB (WISI OC 07 E) zu verbinden. Bitte achten Sie darauf, dass die richtigen Polarisationen an die entsprechenden Anschlüsse angeschlossen werden. 2. Für die LNB-Versorgung wird eine Spannung von V = 12V, H = 20V bereitgestellt.
Assembly instruction Coaxial Connections 1. Ports labelled V or H should be connected to a suitable wideband LNB (recommended WISI OC07 E ). Please make sure that correct polarisations are connected to the relevant ports. 2. Voltage is supplied for LNB powering. V = 12V, H = 20V.
User Manual – OL 16 1310 Montageanleitung Optische Anschlüsse 1. Reinigen Sie die optische Ausgangsbuchse und prüfen Sie die optische Leistung mit einem geeigneten optischen Leistungs- messer. Die optische Leistung am Ausgang des OL17 ist +7dBm ±0,5dB betragen. 2. Reinigen Sie den optischen Stecker und stellen Sie eine Verbin- dung zum optischen Ausgang von OL17 her, achten Sie dabei auf die Ausrichtung der Nut.
Assembly instruction Optical Connection 1. Clean the output fibre optical connector and check the optical power using a suitable optical power meter. Optical power at the output of the OL17 is +7dBm ±0.5dB. 2. Clean the optical connecter and make a connection to the optical output of the OL17, ensuring the keyway is aligned.
User Manual – OL 16 1310 Technical Data OL 17 1310 / Optical Converter Input Frequency range-SAT 290...2340 MHz 75 Ω Impedance Return loss 20 dB (optical) Frequency range DVB-T 470...694 MHz Frequency range DAB 174...240 MHz E/O Converter Frequency range FM 88...108 MHz...
Seite 13
Wideband LNB OC07 Electrical data Input frequency 10.70...12.75 GHz Local Oscillator Frequency 10.41 GHz Output frequency 290...2340 MHz Gain 50...62 dB Noise figure typ. 0.5 dB Wideband LNB Gain variation full band 7 dB (p-p) OC 07 E Polarization isolation typ.