Schneider Airsystems LH-WSL 100 Originalbetriebsanleitung Seite 4

GB
LH-WSL 100
Table of contents - Part 1
1.1 Scope of delivery ......................
1.2 Conventional use ......................
1.3 Technical data ..........................
1.4 Symbols and their meaning ........
1.5 Components.............................
1.6 Disc Cover Adjustment ..............
1.7 Changing tools .........................
1.8 Maintenance.............................
1.1 Scope of delivery
– Angle grinder
– Assembly key ( 2 x )
– Instruction manual
1.2 Conventional use
The compressed air tool is an industrial tool
suitable for:
Cutting metals.
Any other type of use is considered contrary
to the intended use.
1.3 Technical data
see Figure A
1.4 Symbols and their meaning
Power [kW]
P
Q
Air consumption [l/min]
Max. permissible pressure [bar]
p
max
n Rotational speed [rpm]
Grinding disc (diameter) [mm]
Sound pressure level L
tance of 1 m) as per EN ISO
L
15744 [db(A)]
pA
Sound power level L
EN ISO 15744 [dB(A)]
L
WA
I/2
2
2
2
H
2
2
2
1.5 Components
2
01
2
02
03
04
05
06
07
08
09
10
11
1.6 Disc Cover Adjustment
Caution: Depressurise the unit!
See Fig. 2a
1. Screw (item 11) has to be released.
2. Adjust disc cover (item 09).
3. Tighten the screw (item 11).
1.7 Changing tools
Caution: Depressurise the unit!
See Fig. 3a
You can turn the machine upside down when
changing the tool.
When loosening or tightening the locking nut
(item 06) with a 17 mm open-ended span-
ner, press on the locking head (item 07) to
(at dis-
arrest the motor spindle.
pA
1.8 Maintenance
Apply grease via grease nipple (item 10) ap-
according
WA
prox. every 60 working hours.
Vibrations as per ISO 8662
2
[m/s ]
Recommended
(inner) at L= 10 m [mm]
10 m
Overall dimensions:
T
depth x height [mm]
B
Weight [kg]
m
Plug nipple
Trigger lever
Air regulation
Tool fitting
Sanding pad
Union nut
Locking button
Safety lever
Disc cover
Grease nipple
Screw
hose diameter
width x