V7 HB605M Gebrauchsanleitung Seite 10

Headphones will not power on:
• Be sure the headphones are fully charged.
• Confirm the headphones are in pairing mode (blue/red indicato
• Remove "V7 HB605M" from your phone's Bluetooth device list and try again.
• If the model still does not appear, restart the headset and phone, then try again.
After successfully pairing, the headphones disconnect
• Be sure the battery has adequate power and recharge.
• Headphones must be within 10m of most mobile devices.
• Connections may be affected by obstructions such as walls or other electronic
devices. Try moving closer to the device you are connected to.
The sound is distorted when listening to music or there is no sound when
receiving or making calls through my PC
• Press Call Answer twice or turn off the headset, remove and reinsert the
Bluetooth dongle and turn on the headset.
When answering a call, I cannot hear anything
• Ensure the mobile device is connected to the V7 HB605M headphones
and not on phone's speaker or other audio option.
• Increase the volume on your mobile device.
There is no sound when listening to music
• Increase the volume on your headphones or the mobile device.
• Reestablish the Bluetooth wireless connection between the headphones
and your mobile device.
• Check if the audio app has paused or stopped playback.
Headphones will not charge
• Confirm that the charging cable is operational or undamaged.
• Ensure that the USB charging cable is fully seated in the headphones and
wall charger ports.
• Confirm that the USB port is outputting power. Some USB ports shut off
when the PC is off.
Find support for the V7 HB605M at v7world.com
10