Battery Safety - nedis WIFIHS10 Serie Kurzanleitung

All manuals and user guides at all-guides.com
WIFIHS10xx
Wi-Fi body scale
Description
1. Platform
2. Display
3. Status indicator
4. Electrodes
5. Unit-of-measurement button / Reset button
6. Battery compartment
Safety
• To reduce risk of electric shock, this product should
only be opened by an authorized technician when
service is required. Read the manual carefully before
use. Keep the manual for future reference.
• Only use the device for its intended purposes. Do not
use the device for other purposes than described in
the manual.
• Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
• The device is suitable for indoor use only. Do not use
the device outdoors.
• Pacemaker users are advised against using the
device.

Battery safety

• Use only the batteries mentioned in the manual.
• Do not use old and new batteries together.
• Do not use batteries of different types or brands.
• Do not install batteries in reverse polarity.
• Do not short-circuit or disassemble the batteries.
• Do not expose the batteries to water.
• Do not expose the batteries to fire or excessive heat.
• Batteries are prone to leakage when fully discharged.
To avoid damage to the product, remove the
batteries when leaving the product unattended for
longer periods of time.
• If liquid from the batteries comes into contact with
skin or clothing, immediately rinse with fresh water.
Use
1. Download and install the app "Nedis SmartLife" from
Apple App Store or Google Play Store on your mobile
device.
2. Launch the app "Nedis SmartLife".
3. Create a new account or log in to your existing
account.
4. Tap "+" to add the device.
5. Select the correct product from the list.
6. Open the battery compartment. Insert the batteries
(3x AAA/R06, not included) into the battery
compartment. Close the battery compartment.
7. Place the device on a hard and flat surface.
8. If the status indicator does not flash: Press and hold
the reset button for 6 seconds.
If the status indicator flashes: Confirm in the app.
9. Confirm the Wi-Fi network and password.
10. Enter the device name.
11. Open the product in the app and add new user(s).
12. Step on the platform with your bare feet. Make sure
that your feet touch the electrodes on both sides of
the platform.
13. Step off the platform after the display shows the
weight. The device will connect to the Wi-Fi network
and send the measurements to your account.
14. Claim the measurement to the correct user.
Optional:
15. Switch on automatic distribution to automatically
assign future measurements to the correct user
(+/- 3kg compared to last measurement).
16. Share the device with others to allow them to
monitor your measurements.
3
English