Care & Cleaning - Arzum CHEFBLEND MAXI Gebrauchsanweisung

WARNING
1- NEVER operate your Arzum Chefblend Maxi Blender Set unless the
main body is attached to the cutter adapter.
2- Do not lift the main body from its slot unless the motor fully stops.
3- Store the cutting blades in the bowl, since they are very sharp.
CARE & CLEANING
In order to ensure many years of proper operation, due care and cleaning of
your Arzum Chefblend Maxi Blender Set will be too easy and short.
• Ensure that the mains plug is disconnected from the wall socket before
cleaning the unit, and allow it to cool down for a while.
• It is very important for you to rinse the accessories immediately after
using, so that the overall cleaning of the appliance can be easier.
Motor (Main body): NEVER immerse into water or other liquids. Wipe
outside with a slightly damp cloth and then dry
thoroughly.
Cutter Adapter: NEVER immerse into water or other liquids. Wipe the
outside with a slightly damp cloth and then dry thoroughly.
You can wash bowl, double sided stainless steel cutting blades, and
beaters of your Arzum Chefblend Maxi Blender Set by using water and
soap, or in the upper section of a dishwasher.
Repeat the same steps after each use.
20 ARZUM
the outside with a slightly damp cloth and then dry
thoroughly.
Metal Grinder and Mixer: Rinse
using tepid water and soap. When
cleaning under running water,
take care not to leak any water
into the slot on which the motor
is located. If water leaks into the
slot, immediately turn upside down
and shake it out, and then allow it to cool down with
the blade in the upright
position.
Beater Adapter: NEVER
immerse into water or
other liquids. Wipe the