Seite 1
Aufbauanleitung / assembly instructions mod. Q736 - Q739 mit Frontauszug / with front extension SW17 30 x 10,5 M8 x 25 M8 x 65 M10 x 653 1.Montagematerial. 1. Fitting material. M10 x 653 30 x 10,5 3. Fußmontage. 3. Assembling of the table feet.
Seite 2
3. Auf der Festseite die beiden Tischbeine mit je 2 Schrauben (M8 x 65) fixieren. 3. Fix two table legs with each 2 screws (M8 x 65) at the fixed side. 2 / 8 Q736 - Q739 mit Frontauszug Änderungsdatum: 28.09.20...
Seite 3
6. Auf der Auszugsseite die beiden Tischbeine mit je 2 Schrauben (M8 x 25) fixieren. 6. Fix two table legs with each 2 screws (M8 x 25) at the extension side. 3 / 8 Q736 - Q739 mit Frontauszug Änderungsdatum: 28.09.20...
Seite 4
7. Den Tisch wenden, ohne die Füße zu belasten und dann gleichzeitig alle 4 Tischbeine auf dem Boden absetzen. 7. Turn the table right-side-up without using the feet. Then put the table down on all 4 feet at once. 4 / 8 Q736 - Q739 mit Frontauszug Änderungsdatum: 28.09.20...
For this purpose the nut extenson-rod again. (SW13) can be loosened. Adjust the extenson-rod by turning the inner socket screw. Then tighten the nut of the extenson- rod again. 5 / 8 Q736 - Q739 mit Frontauszug Änderungsdatum: 28.09.20...
12c. Swing out the table-extension by using the 12c: Die Klappeinlage mit dem Ledergriff aus- leather belt. Check the hight again; if klappen, die Höhe rechts erneut kontrollie- necessary adjust again. ren und wenn nötig erneut einstellen. 6 / 8 Q736 - Q739 mit Frontauszug Änderungsdatum: 28.09.20...
13c. Swing in both pieces of the table-extension at the same time. Use the leather-belt to swing out the table- extension and check the hight again. If necessary, adjust again. 7 / 8 Q736 - Q739 mit Frontauszug Änderungsdatum: 28.09.20...
Seite 8
14. Fertiger Tisch; nicht ausgezogen. 14. Finished table; not extended. 15. Fertiger Tisch; ausgezogen. 15. Finished table; extended. 8 / 8 Q736 - Q739 mit Frontauszug Änderungsdatum: 28.09.20...