Technical Data - MAC Audio MP TUBE 25 Bedienungsanleitung

DEAR CUSTOMER,
We congratulate you on acquiring this MAC AUDIO Car Stereo Product. You are now the
proud owner of a top high-quality car audio appliance, which we hope will give you many
years of enjoyment.
Please read these instructions carefully so as to ensure optimum and disturbance-
free functioning of the appliance. Technical modifications reserved.
YOUR NEW SUBWOOFER.......
......is the ultimate extension to your car stereo system. It is designed to reproduce the
bass range right down to the lowest frequencies as dynamically as possible. The speaker
system should be connected to your car stereo amplifier, something we
recommend in every case. Technical data plus tips and further advice are also
contained in these instructions.

TECHNICAL DATA

Load capacity RMS / max.:
Impedance (nominal):
Frequency range:
Response:
Weight:
POSITIONING AND SECURING THE SUBWOOFERS
Ensure that the subwoofer cabinet rests on an even surface. The cones (and, where
applicable, the bass reflex tube) should not be placed directly against the car's interior
walls.
Make sure that the subwoofer is secured in such a way that it cannot slip or slide.
Damage resulting from sudden changes in speed (e.g. hard braking) is not covered
under the terms of our guarantee.
GB
MP TUBE 25
180 w / 360 w
4 ohm
22 – 200 Hz
90 dB / w / m
5.5 kg
7
MP TUBE 30
240 w / 480 w
4 ohm
20 – 200 Hz
91 dB / w / m
6 kg