Changing The Door Stop - KKT KOLBE KG7702 Benutzerhandbuch

Changing the door
Changing the door
The unit is supplied with a right door hinge. The door hinges
are on the right page. To open the door to the other side of the
door hinge must be replaced.
• Loosen the screws on the top hinge (Fig.1) with a cross
screwdriver.
• Screw the bolts completely and remove the upper hinge.
• Carefully lift the door off the bottom bolt out and put them
gently aside.
• Pull out the bottom bolt (Fig.2) from the mount and fix the
on the left side, on the designated device (Figure 3).
• Place the door in the desired new opening toward the left
and close the door.
• Fix the upper bolt on the door and secure the upper hinge
also on the left side.
• Before the unit is turned on again, pay attention to the
perfect fit of the appliance door.
Before the device is turned on again, check the exact fit of
the door again.
2
1
3
11