Aamgard AX02 Benutzerhandbuch Seite 10

170220
5. AX02-R Combined Function Rear Lamp
• Functions:
• Brake / stop light:
• Tail light:
• Indicator:
• Housing colour code:
• Connections:
For the indicator we suggest to use the electronic blink relay SU07 or the indicator switch
module SU21. Also we can offer a power control unit (PCU / PDM) for the whole car lighting
system, so e.g. the CU12-NT.
6. AX02-DTM Rain Light for F1 / DTM / GT3 / LMP
• Functions:
• Light colour and intensity:
• Power consumption:
• Housing colour code:
• Connections:
• Control function:
Function and Diagnosis Matrix:
Supply (Pin 3)
Control Input (Pin 5)
Normal Operation
Diagnosis
Output (Pin 4)
Error Case
LEDs
10
three single LED fields for tail light, indicator and stop light
red 628 nm 125 cd
red 628nm 20cd
yellow 589 nm 80 cd
yellow + red (yellow = indicator side)
pin 1 blue
pin 2 orange-white
pin 3 -
pin 4 green
pin 5 grey
FIA rain light with activatable blink function,
full traceable serial numbers and single part test protocol,
optional diagnostics function (current control diagnostics)
red 628 nm, min. 420 cd
550 mA / 7.6 W @ 13.8 V
black
pin 1 minus (ground / earth)
pin 2 not connected
pin 3 plus (12V / battery)
pin 4 diagnosis output or not connected
pin 5 control wire
control wire to minus = blinking light
control wire to plus or open = steady light
0 V / open
dc
0 V
0 V
off
200 mA / 2.8 W @ 13,8 V
35mA / 0.5 W @ 13,8 V
150 mA / 2.1 W @ 13,8 V
minus (ground / earth)
brake light plus (12V / battery)
not connected
tail light plus (12V / battery)
indicator plus (12V / battery)
12 V (10 .. 18 V)
12 V / open
3.3 V 3.3 V
0 V
steady on blinking
AX02
0 V
∏_∏_∏_
0 V