T+A M 200 Bedienungsanleitung Seite 25

Notes
User manual

j
Symbols and notes on the back of the M 200





Text passages marked with this symbol contain important information which must be
observed if the machine is to operate safely and without problems.
This symbol marks text passages which provide supplementary notes and background
information; they are intended to help the user understand how to get the best out of the
machine.
This symbol marks alternating voltages (AC).
The AC voltage required for the device can be found on the printing at the mains input so-
cket. Do not connect the device to other power supplies.
This symbol marks the protective earth connector (ground connection).
The unit is designed for operation at a protective earth conductor socket.
The device is designed to operate in altitudes up to 2000 m above sea level.
The device is designed to operate in a temperate climate.
The range of permissible operating temperatures is +10 ... +35°C.
The only permissible method of disposing of this product is to take it to your local col-
lection centre for electrical waste.
All the components we use meet the German and European safety norms and stan-
dards which are currently valid. This product complies with the EU directives. The
declaration of conformity can be downloaded from www.ta-hifi.com/DoC.
The terminals (marked with the -symbol) can carry high voltages.
Attention! Please refer to the important safety information in this manual.
25