Intended Use; Possible Misuse - Hilti SJD 6 Bedienungsanleitung

▶ Take breaks between working and do physical exercises to improve the blood circulation in your fingers.
Exposure to vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the power tool may give you an electric shock if you damage an electric cable
accidentally.
Careful handling and use of electric tools
▶ Secure the workpiece. A workpiece clamped in a vice or secured by some other clamping device is more
secure than when held only by hand.
Special safety instructions for jig saws
▶ Always guide the product away from your body when working with it.
▶ Never position your hands ahead of or on the saw blade.
▶ Never cut into unknown materials and keep the line of cut above and below the workpiece free of
obstacles.
▶ Never reach or grip below the workpiece while cutting.
3 Description
3.1 Product overview
3.2

Intended use

The product described is a hand-held, electrically powered orbital-action jig saw. It is designed for cutting
plastic, wood and metal materials, drywall board and gypsum fiberboard.
The product is equipped with a removable connector for an optional vacuum cleaner / dust removal hose.
This connector is designed to fit standard suction hoses. In order to connect the suction hose to the product,
use of a suitable adapter may be necessary.
The tool may be operated only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
▶ Use this product only with saw blades equipped with a T-shank.
3.3

Possible misuse

• Use of the product to cut off tree branches or to cut the trunk of a tree is not permissible.
• Use of the product to cut hazardous materials is not permissible.
• Use of the product in a damp or wet environment is not permissible.
3.4 Dust blower
The dust blower directs a jet of air toward the saw blade in order to keep the cutting line free of dust.
*2143763*
1
2143763
Lockbutton
@
On/off switch
;
Grip
=
Stroke rate regulator thumbwheel
%
Air vents
&
Suction adapter
(
Catches
)
Base plate
+
Lever for orbital action
§
Anti-splinter insert
/
Saw blade
:
Contact guard
∙
Guard
$
Blade holder
£
Saw blade release lever
|
English 15