Ec Declaration Of Conformity; Technical Data - Stiga HPS 345 R Gebrauchsanweisung

WARNING
12.1 Using the appliance to wash tyres may damage the tyre and can be dangerous.
12.2 Never point the high pressure jet straight at the tyre.
12.3 Always use the appliance at the lowest pressure setting when cleaning in the vicinity of wheels and tyres.
12.4 Never use the "Turbo Lance" for washing any part of the vehicle.
12.5 For further information refer to section: "8.7 Recommended cleaning procedure".

EC Declaration of Conformity

We, Annovi Reverberi S.p.A, declare that the following STIGA Machine(s):
Designation of machine
Model No.
Rated power
conform(s) to the following European Directives: 2006/42/EC, 2014/35/
EU, 2011/65/EU, 2012/19/EU, 2014/30/EU and 2000/14/EC
and are (is) manufactured in accordance with the following standards or
standardised documents: EN 60335-1; EN 60335-2-79; EN 55014-1;
EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 61000-3-11; EN 60704-1;
EN 62233; EN 50581
Name and address of the person appointed to issue the technical
file: Stefano Reverberi / AR Managing Director Via ML King, 3 - 41122
Modena, Italy
The conformity assessment procedure required by Directive 2000/14/EC
has been performed in accordance with Annex V
Model No.
Measured sound power level:
Guaranteed sound power level:
Date: 08.03.2018
MODENA (I)
Stefano Reverberi
The validity of the warranty is in accordance with the relevant legislation in the country where the product is sold (unless otherwise stated by the producer).
The warranty covers materials, construction and conformity defects during the warranty period, during which time the manufacturer will replace defective
parts and repair the product if not excessively worn, or replace it.
The warranty does not cover components subject to normal wear and tear (valve, piston, water gasket, oil gasket, springs, O-rings, accessories such as the
hose, gun, brushes, wheels, etc.);
The warranty does not cover defects caused by or arising from:
- improper use, misuse, negligence,
- hire or professional use if the product has been sold for domestic use,
- failure to comply with the maintenance instructions provided in this manual,
- repair by unauthorised staff or centres,
- use of non-genuine parts or accessories,
- damage caused by transport, by dirt or foreign bodies, accidents,
- storage or warehousing problems.
Proof of purchase must be submitted to obtain warranty cover.
For assistance, contact the point of sale where your appliance was purchased
High pressure washer
HPS 235 R HPS 345 R
1,8 kW 2,1 kW
HPS 235 R HPS 345 R
91 dB (A) 92 dB (A)
93 dB (A) 94 dB (A)
WARRANTY

Technical Data

Technical Data
Flow rate
Maximum flow rate
Pressure
Maximum pressure
Power
Maximum inlet temperature
Maximum inlet pressure
Gun repulsive force at maximum
pressure
Pump oil type
Protection class
Motor insulation
Motor protection
Voltage
Maximum permitted electrical system
impedance
Sound pressure level L (ISO 3744)(K
PA
= 2,5 dB(A))
Sound power level L (ISO 3744)(K
WA
= 2,5 dB(A))
2
Appliance vibration (K = 1 m/s ):
Weight
Subject to technical modification!
81
Unit
HPS 235 R HPS 345 R
l/min 5,5 6
l/min 7,3 7,5
MPa 10 11
MPa 13,5 14,5
kW 1,8 2,1
°C 50 50
MPa 1 1
N
13,00 14,80
kg - -
II / I /
-
Class F F
- IPX5 IPX5
V~/Hz 220-240 - 50/60 220-240/50
Ω
- -
dB (A)
78,8 79,7
dB (A)
93 94
2
m/s < 2,5 < 2,5
kg 12,3 17,4
EN