Herunterladen Inhalt Inhalt Diese Seite drucken

VINCENT DAC-700 Bedienungsanleitung Seite 35

D/a-wandler mit röhrenausgangsstufe
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CONNECTIONS FOR THE
STANDBY CONTROL (POWER CONTROL)
Many AV-Systems consist of a multitude of individual components. To avoid the necessity of switching them
on and off before and after every use, many manufacturers have equipped their devices with what is
known as "POWER CONTROL" circuit or "TRIGGER". This kind of remote-controlled standby circuit is
used primarily for preamplifier and power amplifiers. Particularly for preamplifiers and main amplifiers
this kind of remote standby control is utilized, as power amplifiers are often placed far from other devices
near the speakers. To employ these functions, direct or indirect cable connections must be made between
the preamplifier (or integrated amplifier) and all the devices which support this function. The "POWER
CONTROL" function operates in such a way that each switching on or off of one device in the system (usu-
ally the preamplifier) automatically brings about the switching on or off of all the connected devices which
support this function. Please keep in mind that all devices which respond to the power control are not dis-
connected from the mains network when switched off. They are set to a standby state instead. For con-
necting cables, two-core cables with 3.5 mm jack plugs (mono) are used. For each connection between
two devices one of those cables is needed.
If you don't wish to use this function or if the other components do not support it, all you have to do is
leave out these cable connections.
The DAC-700 has an input and an output for power control. This means it can receive the switching signal
from a device and pass it on to another device. The sending device (usually a preamplifier or integrated
amplifier) can be connected to each of the two "Power Control" connectors (10). If a transmitting device
is connected, the second jack connector is used to pass on the switching signal or remains free.
DAC-700
pre amplifier
e.g. SA-T7 MK
power control cable
second main amplifier
e.g. second SP-T700
Vincent
35

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für VINCENT DAC-700

Inhaltsverzeichnis