Herunterladen Diese Seite drucken

Werbung

THIS PRODUCT HAS BEEN DESIGNED TO ASSIST YOU IN REPRODUCING MATERIALS IN WHICH YOU OWN THE COPYRIGHT OR
HAVE OBTAINED PERMISSION TO COPY FROM THE COPYRIGHT OWNER. UNLESS YOU OWN THE COPYRIGHT OR HAVE OBTAINED
PERMISSION TO COPY FROM THE COPYRIGHT OWNER, YOU MAY BE VIOLATING COPYRIGHT LAW AND BE SUBJECT TO PAYMENT
OF DAMAGES AND OTHER REMEDIES. IF YOU ARE UNCERTAIN ABOUT YOUR RIGHTS YOU SHOULD CONTACT YOUR LEGAL ADVISOR.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment
For questions about Elgato product compliance with FCC regulations, please contact:
Compliance Officer, Corsair Memory Inc., 47100 Bayside Pkwy, Fremont, CA 94538, USA
Quick Start Guide
Rating: 5 V, min 2.4 A
+ R-R-CSI-20GAP9901
Applicant Name (상호명): Corsair Memory, Inc.
Product Name (제품명칭): Game Capture 4K60 S+
Model No.(모델명): 20GAP9901
Manufactured Year & Month (제조연월): Please refer to gift box sticker
Manufacturer & Country of Origin (제조자 및 제조국가): Corsair Memory, Inc./ Made in Taiwan
Part: 51GAP9902
/elgatogaming

Werbung

loading

Inhaltszusammenfassung für Elgato 51GAP9902

  • Seite 1 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment For questions about Elgato product compliance with FCC regulations, please contact: Compliance Officer, Corsair Memory Inc., 47100 Bayside Pkwy, Fremont, CA 94538, USA Quick Start Guide Rating: 5 V, min 2.4 A...
  • Seite 2 Contents Quick Start Guide Guide de prise en main rapide Kurzanleitung Guía de inicio rápido Guida rapida Snelstartgids Guia de Início Rápido Hurtigveiledning Pikaopas Lynstart guide Kom igång Skrócona instrukcja Краткое руководство ‫دليل البدء السريع‬ クイックスタートガイド 퀵 스타트 가이드 快速入门指南 快速入門指南...
  • Seite 3: Led-Status

    PC Recording elgato.com/gaming/download Download Elgato 4K Capture Utility to get started. min. 5V, 2.4 A LED Status Device connected Recording – Slow flashing to PC via USB Standby – Slow Booting – Flashing Error message – Rapid flashing flashing (no signal, HDCP, SD card error, SD card locked, SD card full, SD card too slow) When using 4K60 S+ for PC recording, POWER and USB must be connected.
  • Seite 4: Start Recording

    SD Card Recording LED Status Ready to start recording SD card recording – Slow Processing SD card recording – Rapid flashing flashing (requires valid input signal) Standby – Slow Booting – Flashing Error message – Rapid flashing min. 5V, 2.4 A flashing (no signal, HDCP, SD card error, SD card locked, SD card full, SD card too slow)
  • Seite 5 Scarica Elgato 4K Capture Utility per iniziare. anslutna. Använd endast nätaggregatet som följde med produkten. Download de Elgato 4K Capture Utility om aan de slag te gaan. Kiedy karta 4K60 S+ jest używana do nagrywania na komputerze, musi być Para começar, descarregue o Elgato 4K Capture Utility.
  • Seite 6 SD Card Recording Als je 4K60 S+ gebruikt voor opnamen op een SD-kaart, moet alleen de stroomadapter aangesloten zijn. Sluit de USB-kabel niet aan op je pc. Gebruik alleen de meegeleverde stroomadapter van het product. Minimale snelheid van SD-kaart: UHS Class 3 / V30 Indeling: FAT32 of exFAT Voorkom bestandsbeschadiging door de SD-kaart niet meteen na het stoppen van min.
  • Seite 7 LED Codes Kiedy karta 4K60 S+ jest używana do nagrywania na karcie SD, musi być podłączony tylko zasilacz. Nie podłączaj kabla USB do komputera. Należy używać tylko zasilacza dołączonego do systemu. Minimalna szybkość karty SD: UHS Class 3 / V30 Veille –...
  • Seite 8: Sd Card Mode

    SD Card Mode PC Mode Prêt à enregistrer Enregistrement sur la Traitement des données enregistrées Appareil branché au PC en USB Enregistrement en cours – carte SD – sur la carte SD – Clignotement rapide Clignotement lent (nécessite un signal d’entrée valide) Clignotement lent Gerät via USB an PC angeschlossen Aufnahme –...

Diese Anleitung auch für:

4k60 s+