Technical Data; Noise Information; Vibration Information - AEG Powertools PS 216 L Originalbetriebsanleitung

TECHNICAL DATA

Mitresaw *
Production code
Rated input
No-load speed
Saw blade dia. x hole dia
Saw blade thickness
Max. cutting capacity
Mitre 0°/ Inclination 0°
Mitre 45°/ Inclination 0°
Mitre 0°/ Inclination 45°
Mitre 45°/ Inclination 45°
Min. workpiece dimensions
Weight according EPTA-Procedure 01/2003

Noise information

Measured values determined according to EN 61029-2-9:2009. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
GB
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 61029
Sawing of wood: Vibration emission value a
Uncertainty K=
1 PS Mitresaw
^
=
2 The S6-40% indicates a load profile of 4 min load and 6 min idle time
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
MITRESAW SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Always wear goggles when using the machine. It is recommended
to wear gloves, sturdy non slipping shoes and apron.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Wear gloves!
Before using the tool please read the instructions. If possible have
the tool demonstrated.
Ensure that the machine is always stable and secure (e.g. fixed to
a bench)
English
20
h
Keep the floor area free of loose material e.g. chips and cut-offs.
Do not use saw blades which are damaged or deformed
Do not use saw blades not corresponding to the key data given in
these instructions for use.
Only use tools that meet standard EN 847-1.
Do not use saw blades made of high-speed steel.
Only use saw blades which have been properly sharpened.
It is necessary to select a saw blade which is suitable for the
material being cut.
It is essential to adhere to the maximum speed specified on the
saw blade.
Transport and store the tools in a suitable receptacle;
Do not use any flanges other than those supplied or indicated in the
instruction manual to secure the saw blade.
Never use the mitre saw to cut materials other than those specified
in the instruction manual.
PS 216 L PS 254 L
4522 03 02... 4522 09 02...
4522 06 02... 4522 12 02...
... 000001-999999 ... 000001-999999
220-240 V, 50 HZ, S6(40%), 220-240 V, 50 HZ, S6(40%),
1500 W, 6,5 A 2000 W, 8,3 A
5000 min -1 4500 min
216 x 30 mm 254 x 30 mm
1,6 mm 1,8 mm
65 x 305 mm 90 x 305 mm
65 x 215 mm 90 x 215 mm
36 x 305 mm 50 x 305 mm
36 x 215 mm 50x 215 mm
130 x 35 x 2,5 mm 130 x 35 x 2,5 mm
16,7 kg 19,6 kg
99,2 dB (A) 96,7 dB (A)
112,2 dB (A) 109,7 dB (A)
3,5 m/s 2 2,133 m/s
1,5 m/s 1,5 m/s
2
-1
2
2