DO7091P
For safety purpose you should read these instructions carefully before using the
appliance.
The appliance is designed for domestic use and may only be operated in accordance
with these instructions for use.
- Check the mains voltage stated on the rating plate corresponds to the local electricity
supply.
- Unwind and straighten the power cord before use.
- Disconnect appliance from the mains supply. Before plug in or unplug any ironing
machine to appliance. Before remove any part from the appliance or refi t any part to
the appliance. Before cleaning and/or maintenance. If work improperly. After used.
- Keep away the appliance from children.
- Turn the power switch off before disconnect the appliance from mains supply.
- The iron board shall only be used in conjunction with iron or iron with separate
boiler.
- The supply voltage of the iron or iron with separate boiler being connected shall
corresponds with the voltage marked for the socket.
- The max load of the socket is
2200 W (for AC220 V)
2300 W (for AC230 V)
2400W (for AC240V)
- If the power cord/any part of the appliance is damaged, the manufacturer or its
service agent or similarly qualifi ed person must replace it in order to avoid hazard.
- Do not allow children touch the appliance or the power cord when operating.
- Do not use an extension power cord set unless competent authority has approved it.
- Do not touch any hot part of appliance.
- Do not using a steam iron / generator when the ironing board is cold or unventilated
as this might cause humidity to accumulate within the ironing board.
- Do not contact with the metal parts of the device that are subject to heat.
- Do not leave the appliance unattended when it is connected to a mains supply outlet.
- Avoid that fi ngers becomes squeezed during closing the board.
- Do not use the appliance when it is damaged or performs abnormally.
14