Preparation For Use; Iv. Instructions For Use - eta Sorento Plus Bedienungsanleitung

EN
A4
1
A1
A5
2
1
A7
A3
A
III. PREPARATION FOR USE
Remove all the packing material and take out the toaster. Remove all possible adhesion
foils, stick-on labels or paper from the toaster. After the first putting into operation and let
an open toaster in operation with a window open for about 10 minutes, then turn it off and
let it cool down. After the appliance cools down, swipe the parts that come in contact with
food with a soft, wet and clean cloth or a paper towel.
Changing the boards
Press button A7 and remove board A5 by tilting (Picture 1). Insert the protrusions on the
board to the two openings in the coating and secure by tilting (you will hear a click sound).

IV. INSTRUCTIONS FOR USE

Place the assembled appliance on a flat, steady, smooth and clean surface at a height
of at least 85 cm, out of the reach of children (see sec. I. SAFETY WARNINGS). Leave
enough space to ensure sufficient ventilation. To choose the desired replaceable plates
take out those which are placed in the appliance (unless you want to use those). Plug the
power cord connector A6 to an electric socket. The socket must be readily accessible so
that the appliance could be easily disconnected from the mains in case of danger. Now
the appliance is ready for use. A red and green signaling light A2 will come on, signaling
connection to electric power supply. The plates will start to heat. When the operating
temperature is reached, the green signaling light A2 will come OFF.
A3
1
A6
A7
A2
sandwich - triangles / shells
vaffle
pacakes - classic
16 / 35
grill - panini
pacakes - childrens cookies