Keeping Your Shaver In Top Shape; Accessories - Braun 5444 Bedienungsanleitung

10
4 Keeping your shaver in top
shape
4.1 Cleaning
• After shaving, switch the shaver off. Press the
release button, take off the shaver foil and gently tap
it out on a flat surface.
• Then thoroughly clean the cutter block with the
brush as well as the inner area of the pivoting head.
About every four weeks, clean the cutter block with
Braun cleaning agents.
• If you have a very dry skin and you notice a reduced
operation time of the shaver, you should put a drop
of sewing machine oil onto the shaver foil.
4.2 Replacing the shaving parts
To maintain 100% shaving performance, replace
your foil and cutter block every 18 months or when
worn. Change both parts at the same time for a
closer shave with less skin irritation.
4.3 Preserving the cell unit
In order to maintain the optimum capacity of the
rechargeable batteries, the shaver has to be fully
discharged (through normal use) every 6 months
approximately. Then recharge the shaver to full
capacity. Do not expose the shaver to temperatures
higher than 50 °C for extended periods of time.

5 Accessories

Available from your dealer or at Braun Service
centres.
(Shaver foil and cutter block: 5000 Series)