Legal Information; Frequency Bands And Power - Xiaomi Redmi 8 Bedienungsanleitung

During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands, and placed in positions that
simulate RF exposure in usage against the head with no separation, and near
the body with the separation of 5 mm.
SAR compliance for body operation is based on a separation distance of
5 mm between the unit and the human body. Carry this device at least 5 mm
away from your body to ensure RF exposure level compliant or lower to the
reported level. To support body operation, choose the belt clips or holsters,
which do not contain metallic components, to maintain a separation of 5 mm
between this device and your body. RF exposure compliance with any body
accessory, which contains metal, was not tested and certified, and use such
body-worn accessory should be avoided.

Legal Information

This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device may be restricted for use, depending on local network.
Receiver Category 2
Ensure the power adapter used meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1 and has been tested and approved according to
national or local standards.

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas only and
maximum radio-frequency power:
GSM 900: 35 dBm
GSM 1800: 32 dBm
UMTS band 1/8: 25 dBm
LTE band 1/3/7/8/20/38/40: 25.7 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
05