Legal Information; Frequency Bands And Power - Xiaomi Mi 9T Pro Bedienungsanleitung

During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands, and placed in positions that
simulate RF exposure in usage against the head with no separation, and
near the body with the separation of 5 mm.
SAR compliance for body operation is based on a separation distance of
5 mm between the unit and the human body. Carry this device at least
5 mm away from your body to ensure RF exposure level compliant or lower
to the reported level. To support body operation, choose the belt clips or
holsters, which do not contain metallic components, to maintain a
separation of 5 mm between this device and your body. RF exposure
compliance with any body accessory, which contains metal, was not
tested and certified, and use such body-worn accessory should be
avoided.

Legal Information

This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device is restricted to indoor use only when operating in 5150 to
5350Mhz frequency range in following countries:
AT
EE
IT
PT
Receiver Category 2
Ensure the power adapter used meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1 and has been tested and approved according to
national or local standards.

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas only
and maximum radio-frequency power:
GSM 900: 35 dBm
GSM 1800: 32 dBm
UMTS band 1/8: 25 dBm
LTE band 1/3/7/8/20/28/38/40: 25.7 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150~5350 MHz: 20 dBm, 5470~5725 MHz: 20 dBm,
5725~5825 MHz: 14 dBm
NFC: 13.56Mhz < -11.25 dBuA/m at 10m
BE BG HR
FI FR
DE
LV LT LU
RO SK SI
CY CZ DK
EL HU IE
MT NL PL
ES SE UK
05