Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical Data
Bench drill
Art. No
Mains voltage
Mains frequency
Safety class
Motor power
Spindle stroke
Spindle speed
Number of steps
Reach
Drill chuck range
Drill chuck cone
max. Drilling capacity in steel
Table size WxD
Base plate WxD
Diameter of columns
Length of connecting cable
Type of cable
Length
Width
Height
Net/gross weight
Noise details
Sound pressure level L
pA
Sound power level L
WA
Wear ear protectors!
The numerical values given are emission levels and
not necessarily safe working levels. Although there
is a correlation between the emission levels and the
acceptable exposure levels, they cannot be reliably
used to determine whether or not any additional sa-
fety measures are necessary. The characteristics of the
work space, other sources of noise, i.e. the number of
machines and other processes running in the vicinity
and so on, are all factors that can influence the actual
exposure levels of the employees. Moreover, the
acceptable exposure levels can vary from country
to country. This information should enable the
machine's operator to carry out a better assessment
of the risks and hazards.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
WT - TB 14/509
of the trainer during occupational education.
3000
In case of any doubts about connection and operati-
on refer please to our customer center
230 V
50 Hz
Specified Conditions Of Use
I
Bench drilling machine for light and medium drilling
500 W
work in wood, metals and plastics.
50 mm
The machine may only be used in a technically
perfect condition and taking into account all safety
500-2500 min
-1
information.
9
Do not use this product in any other way as stated
115 mm
for normal use. Not observing general regulations
in force and instructions from this manual does not
1,5 - 16 mm
make the manufacturer liable for damages.
B16
16 mm
It is strictly prohibited to disassemble, modify
and purposely remove the protective equipment on
170 x 175mm
the unit and fit other protective equipment instead.
198 x 320mm
46 mm
Even when the device is used properly and all safety
2,0 m
regulations are complied with, there still may be
some residual risks.
H05VV-F
• noise emissions
470 mm
• dust emissions
220 mm
• vibrations to hand and arms
630 mm
• Danger of burns
20 / 21 kg
Tool and workpiece heat up during operation.
• Risk of injury
Sharp tools and workpiece edges
58 dB (A)
71 db (A)
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
ENGLISH
19
Werbung
Inhaltsverzeichnis
