Bluetooth Mode - Kruger&Matz KM0522 Bedienungsanleitung

bluetooth Mode

Pairing:
1. Slide the power switch to turn on the
speaker. The speaker will automatically enter
Bluetooth mode.
2. Please keep the speaker and external device
close to each other when pairing.
3. Enable the Bluetooth function on the external
device and search for new Bluetooth devices.
4. Select and connect with this device (KM Solo).
Enter password: "0000" if necessary.
5. The speaker will issue a sound signifying
successful pairing.
Notes:
• Every time the speaker is switched on,
it will connect to last connected device
automatically. Please note, your device must
be on with Bluetooth function turned on.
• Bluetooth connection will persist even when
the speaker is in other modes (AUX, micro SD).
• If pairing is not completed within 5 minutes,
the speaker will turn off to save battery. In
that case, repeat paring process to pair the
speaker with external device.
auX Mode
1. Use 3.5 mm AUX cable and connect one end
of the cable into the speaker's 3,5 mm input.
2. The speaker will automatically enter AUX
mode.
3. Connect the other end into the 3,5 mm input
of the device you wish to play music from.
4. Start playing music from your device.
12
Owner's manual