Technical Data - Niko 78300 Serie Handbuch

XXX-78300
Adding a switching command
Step Action
1 Press for three seconds.
2 Press briefly...
3 or .
Press
4
Press .
5
Press or .
6
Press .
*
7
Press .
* If you select the memory location after an available memory location, then the number of memory locations
that are still available appears. For example: rE:21 = there are still 21 memory locations available.
Changing a switching command
Step Action
1 Press for three seconds.
2 Press briefly...
3 Press briefly...
4 Press or .
5 Press .
6
Press or .
7
Press .
Deleting a switching command
Step Action
1
Press for three seconds.
2
Press briefly...
3
Press and simultaneously.
4 Press .
3.3. Reset
Step Action
1 Press and hold and press
briefly.
nv Niko sa
Result
You enter the programming mode.
The first switching command (01) appears.
... until the desired week block or day appears. In
sequence:
- 1234567 = entire week (Monday through Sunday)
- 123456 = long work week (Monday through Saturday)
- 12345 = short work week (Monday through Friday)
- 567 = long weekend (Friday through Sunday)
- 67 = short weekend (Saturday and Sunday)
- 1 = Monday, 2 = Tuesday (individual days)
You set the hour at which the position of the roll-down
shutter/sun blind must change:
press briefly: set per minute
•
• press and hold: set per five minutes and then
per hour
The current position of the roll-down shutter/sun blind
relative to the completely closed position appears on
the display.
You set the desired position of the roll-down shutter/
sun blind relative to the completely closed position.
The next memory location is called up.
You return to the start screen.
Result
You enter the programming mode.
The first switching command (01) appears.
... until you have selected the switching command to
be changed.
... until the desired week block or day appears. In
sequence:
- 1234567 = entire week (Monday through Sunday)
- 123456 = long work week (Monday through Saturday)
- 12345 = short work week (Monday through Friday)
- 567 = long weekend (Friday through Sunday)
- 67 = short weekend (Saturday and Sunday)
- 1 = Monday, 2 = Tuesday (individual days)
You set the hour at which the position of the roll-down
shutter/sun blind must change:
press briefly: set per minute
•
press and hold: set per five minutes and
•
then per hour
The current position of the roll-down shutter/sun blind
relative to the completely closed position appears on
the display.
You set the desired position of the roll-down shutter/
sun blind relative to the completely closed position.
You return to the start screen.
Result
You enter the programming mode.
The first switching command (01) appears.
... until you have selected the switching command
to be deleted.
The content of the selected memory location is
deleted.
You return to the start screen.
Result
You delete all of the entered programs and settings.
The roll-down shutter switch is returned to the factory
settings.
This appears on the display as "t001" (also see
"Setting run times" in section 3.1.).
Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: support@Niko.be — www.niko.be
4. OPERATION AND USE
A. Manual mode
The roll-down shutter/sun blind position can be manually changed temporarily at any time, even while
an automatic program (automatic mode) is running.
Step Action
1 Press and hold .
2
Press and hold .
A flashing hand symbol ( ) indicates that you have manually adjusted the position relative to the
programmed position. This position is temporary. The roll-down shutter switch is now in manual mode.
At the next change planned for the program, the automatic mode will be reactivated. The hand symbol
( ) disappears.
B. Permanent mode
Press and simultaneously to deactivate the automatic mode and to permanently activate the
manually selected position of the roll-down shutter/sun blind. The roll-down shutter switch is now in
permanent mode: the hand symbol (
Step Action
1
Press and hold .
2
Press and hold .
Press or briefly to deactivate the permanent mode and to return to the manual mode.
C. Functions with an external push button
You can also control the sensor from various locations.
You can connect two external push buttons to the actuator between L and E1 and E2, respectively:
• The contact between L and E1 has the same function as
The contact between L and E2 has the same function as
•
5. TROUBLESHOOTING
In the event of malfunctions, press briefly.
The roll-down shutter switch restarts. The settings are saved

6. TECHNICAL DATA

number of switching commands
min. switching time
operational reserve (available after 12 hours of
operation)
flush-mounting height
ambient temperature
storage temperature
7. WARNINGS REGARDING INSTALLATION
- The installation should be carried out by a registered installer and in compliance with the statutory regulations.
- This user manual should be presented to the user. It should be included in the electrical installation file, and
it should be passed on to any new owners. Additional copies are available on the Niko website or via the Niko
support service.
- During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology currently available at the time of installation.
- this user manual, which only states general regulations and should therefore be read within the scope of
each specific installation.
- the rules of proper workmanship.
This product complies with all of the relevant European guidelines and regulations. If applicable, you can find
the EC declaration of conformity regarding this product at www.niko.eu.
8. NIKO SUPPORT
In case of doubt or for the specific exchange procedure in case of a possible defect, contact the Niko support
service in Belgium at +32 3 778 90 80 or your wholesaler/installer. Contact details and more information can
be found at www.niko.eu under the "Help and advice" section.
9. GUARANTEE PROVISIONS
- The period of guarantee is four years from the date of delivery. The delivery date is the invoice date of purchase
of the product by the consumer. If there is no invoice, the date of production applies.
- The consumer is obliged to inform Niko in writing about the non-conformity, within two months after stating
the defect.
- In case of a non-conformity, the consumer only has the right to a product repair or replacement free of charge,
which shall be decided by Niko.
- Niko shall not be held liable for a defect or damage resulting from incorrect installation, improper or careless
use, incorrect operation, transformation of the product, maintenance that does not adhere to the maintenance
instructions or an external cause, such as damage due to moisture or overvoltage.
- The compulsory regulations of the national legislation concerning the sale of consumer goods and the
protection of the consumer in the countries where Niko sells, directly or via sister companies, subsidiaries,
chain stores, distributors, agents or permanent sales representatives, take priority over the above-mentioned
rules and regulations.
Do not dump this product with the unsorted waste. Bring it to a recognised waste collection point. Together with producers
and importers, you have an important role to play in the advancement of sorting, recycling and reusing discarded electrical
and electronic appliances. In order to finance the waste collection and processing, the government levies a recycling
contribution in some cases (included in the purchase price of this product).
Result
The roll-down shutter/sun blind is opened.
The roll-down shutter/sun blind is closed.
) is not flashing but is illuminated permanently.
Result
The roll-down shutter/sun blind is opened.
The roll-down shutter/sun blind is closed.
.
.
max. 24
1 minute
clock will continue to work for 30 more minutes
0.8 – 1.5 m
0 – 40°C
-25 – 75°C
PMXXX-78300R15342