Control Buttons; Basic Settings - Niko 78300 Serie Handbuch

XXX-78300
Read the complete user manual before carrying out the installation and activating the system.
1. DESCRIPTION
This digital roll-down shutter switch is part of the Niko product range of sensors and actuators. This range
offers a number of comfort functions in combination with various switching functions.
The control of this switch occurs via a sensor and an actuator:
• A sensor (A) is the visible electronic component that – automatically or after manual control – sends
a switching command to the connected actuator for being performed. This component is available
in all Niko finishes and colours.
The sensor is clicked onto the actuator.
• An actuator (B) is the switching component that performs the action requested by the connected
sensor, such as switching the light or raising a roll-down shutter/sun blind.
This component is located behind the sensor in the flush-mounting box.
The roll-down shutter switch (sensor) is intended for indoor use only and can be combined with the following
actuator:
420-00300: base with two switching contacts (4 A, 230 V) to which an external push button can
•
be connected
A
09 : 27
XXX-78300
B
4A
4A
EXT1
EXT2
R,L
420-0030X
You use one roll-down shutter switch per roll-down shutter/sun blind. Parallel connection of motors without
an intermediate relay is not permitted.
2. COMPONENTS
09 : 27

2.1. Control buttons

Control button Function
roll-down shutter/sun blind up
roll-down shutter/sun blind down
selects the day
1
sets day and hour – back to start screen
programming
1
reset 2
1 Use only when activating or programming the digital roll-down shutter switch.
2 Do not use sharp metal objects to depress this button.
2.2. Display
➊
1 2 3 4 5 6 7
88:88
Prog.
88
➏
Symbol Meaning
1 current day (1 = Monday, 2 = Tuesday, ...)
2 programming mode
3 day- and time-setting mode
4 direction indication of roll-down shutter/sun blind
5 manual control is activated
6 memory location
3. PROGRAMMING
The roll-down shutter switch automatically returns to the start screen if you do not take any actions for a period
of 30 seconds while programming.

3.1. Basic settings

The basic settings are:
run time for the roll-down shutter or the sun blind.
•
day and time.
•
You must program these settings when you connect to the power for the first time (activation) and after each reset.
nv Niko sa
➋
➌
l 4
➎
Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: support@Niko.be — www.niko.be
A. Setting run times
The run time has a standard setting of 30 seconds for opening and 30 seconds for closing the roll-down
shutter or sun blind. This appears on the display as "t030".
Not all roll-down shutters or sun blinds are the same length. Furthermore, the run times for the complete opening
and the complete closing of a roll-down shutter/sun blind vary. Therefore, you must set these times individually.
Attention: Before setting the run times, the roll-down shutter or sun blind must be in the completely opened position.
During activation or after a reset, all of the symbols and segments appear briefly on the display. Thereafter,
"t001" appears on the display.
Step Action
1
Press until the roll-down shutter/sun blind
is completely closed.
2
Press until the roll-down shutter/sun blind
is completely opened.
3
Press .
B. Changing the set run times
Attention: Before changing the set run times, the roll-down shutter or sun blind must be in the completely
opened position.
Step Action
1
Press for three seconds.
2
Press and simultaneously.
3
Press until the roll-down shutter/sun blind
is completely closed.
4
Press until the roll-down shutter/sun blind
is completely opened.
5
Press .
C. Setting day and time
Step Action
1 Press for three seconds to activate the
mode for setting the day and time.*
2
Press .
3
Press or .
4
Press .
After a lengthy power interruption, the roll-down shutter switch automatically switches to the day- and
*
time-setting mode. Go directly to step 2.
3.2. Setting day or week programs (automatic mode)
The roll-down shutter switch can automatically – program-controlled – open and close roll-down shutters
and sun blinds. For this, the device is equipped with 24 switching commands. Each command contains:
the time when switching must occur (switching moment).
•
the day(s) when the command is applicable.
•
the desired position of the roll-down shutter or sun blind.
•
Result
The run time required to completely lower
the roll-down shutter/sun blind is measured
and saved when you release the button.
The run time required to completely open the
roll down shutter/sun blind is measured and
saved when you release the button.
You return to the start screen.
Result
You enter the programming mode.
You can now enter the new run times.
The run time required to completely lower
the roll-down shutter/sun blind is measured
and saved when you release the button.
The run time required to completely open the
roll down shutter/sun blind is measured and
saved when you release the button.
You return to the start screen.
Result
The time and the day begin to flash.
You set the day: 1 = Monday,
2 = Tuesday, ...
You set the time:
press briefly: set per minute
•
• press and hold: set per five minutes
and then per hour
The day and time selected are confirmed.
You return to the start screen.
PMXXX-78300R15342