Screen Setting - XZENT xt8020 Bedienungsanleitung

Screen Setting

Accessing the Screen Setup Menu
• Press the setup on the screen.
• Select the "Others" icon on the screen to access the screen setup.
Selecting a Feature for Adjustment
Press the (/) buttons on the remote to select a feature to be adjusted. Rotate
SMART DIAL clockwise/anticlockwise to select a feature to be adjusted. Touch directly
the options on the screen to select a feature to be adjusted.
Adjusting a Feature
Adjusting a Feature
Setting
TS calibrate
Set password
Rating
Screen saver
Load factory*
Beep tone
Antenna
*Upon loading factory default, DivX must be re-registered. Please consult your dealer for
further assistance.
Options
No
Touch "Yes" to enter the touch screen calibration
mode.
Yes
1.2.3.4.
Choose different ratings.
5.6.7.8.
On
Touch to activate/deactivate the screen saver.
Off
Yes
Loads the factory default settings.
No
On
Touch to activate/deactivate beep tones.
Off
On
Touch to activate/deactivate phantom power of
antenna.
Off
14
Function