Echos ECO-355 Bedienungsanleitung Seite 13

Press to cancel the temperature setting (the light °C is off) and to choose the heating on half power
( ) or full power (
The heater working on full power when the room temperature is 4°C lower than the setting temperature.
The heater working on half power when the room temperature is between 0° and 2°C lower than the
setting temperature.
The heater switches off when the room temperature is higher than the setting temperature. the fan working
30 seconds to make inside cool to protect component, then fan stop, the unit enter into standby.
The heater switches on again when the room temperature falls 2°C below the setting temperature.
TURN ON TIMER
Press to set the appointment turn-on time in 1-12 hours (the light
decreases 1 hour for each hour passed. When the appointment power-on time arrived, the product will
automatically turn on. The default setting temperature is 23°C. If not setting the setting temperature and
weekly program, the unit will automatically turn-off after continuous-by.
For example to set appointment turn-on time to 8 hours
TURN-OFF TIMER
Press to set the appointment turn-on time in 1-12 hours (the light
When the appointment power-off time arrived, the product will automatically turn off. The default setting
temperature is 23°C
For example to set appointment turn-off time to 8 hours
SET CURRENT TIME (ONLY BY REMOTE CONTROL)
- Press to switch on the appliance.
- Press SET to display the hour.
- Press + or - to set the current hour (00 to 23). - Press SET again to display the minute.
- Press + or - to set the current minute (00 to 59). - Press SET again to display the day of week.
- Press + or - to set the current day (d1= Monday, d2= Tuesday, d3= Wednesday, d4= Thursday,
d5= Friday, d6= Saturday, d7= Sunday
- Press OK to confirm the setting
).
is on). The display automatically
is on)