Echos ECO-355 Bedienungsanleitung Seite 12

THE CONTROLS
ON-OFF
- Press the ON -OFF switch to switch the appliance ON (I) or OFF
(O).
=Power
=Mode selection
= Heating on half power (1000W)
= Heating on full power (2000W)
P = Weekly programming
= Open window Mode
°C = Setting temperature
= swing
= Timer (Turn-on/Turn-off)
FAN AND HEATING (BY CONTROL PANEL)
Press
Stops
(the fan stops 30 seconds
after the stand-by was set)
Heating on full power with swing
The default setting temperature is 23°C when the light °C is off
Press to switch on the appliance
- Press + or - to set the setting temperature from 10°C to 49°C (the light °C
is on). If room temperature is 15°C, setting temperature 25°C, the display
shows as the picture does:
Stand-by mode
the button to select one of the following mode
by going into standby Fan without heating
Heating on full power
Heating on half power