Checking The Numbers In Memory; To Store A Number In Memory (16 Digits Or Less) - Philips Baseline pro Bedienungsanleitung

Making a call using the
handset
Lift the handset
Dial the number
You can turn the loudspeaker on and off
by pressing The LED indicator by the
symbol is lit when the loudspeaker is on.
At the end of the call replace the handset
to release the line
Making a call hands-free
Press
Dial the number
At the end of the call press
the line
Making a call using a number
from memory
Lift the handset or press
Note: There may be two numbers
assigned to a button.
To get the first number, just press the
Œ..‹
memory button
To get the second number, press
the memory button
to release
then
Œ..‹
Checking the numbers in
memory
Lift the handset or press
Note: There may be two numbers
assigned to a button.
To check the first number, press
the memory button
To check the second number, press
then then the memory button
To store a number in memory
(16 digits or less)
Lift the handset or press
Note: Two 16 digit numbers can be stored
under each memory button.
To store the first number
Press and dial the number
Press again, then the memory button
Œ..‹
To store the second number
Press and dial the number
Press again, then
Œ..‹
memory button
Note: For some calls you may need to
wait for a second dialling tone before the
number is called. In these cases insert a
pause in the number by pressing
one pause is not enough to get the line,
insert extra pauses. However, take note
that the number in memory cannot be
more than 16 digits long and that each
pause counts as a digit.
BaseLine Pro
then
Œ..‹
Œ..‹
then the
If
3