HOMCOM 370-025 Bedienungsanleitung Seite 8

INSTALLATION
1. As shown in the figure:
- Insert the rear axle into the rear wheel jack
of the main frame. Tap gently until the bead
lock clicks into place.
3. As shown in the figure:
- Insert the front wheel assembly into
the main frame.
- Attach the front dome and place it into
the front basket.
- Insert the handle tube mouth into the
front fork on the tube mouth, aligning
the screw holes.
- Thread the handlebar set screw
through the tube hole.
- Use the socket wrench tool to tighten
the screw and lower the front dome.
EN
2. As shown in the figure:
- Insert the front fork's
connection into the front fork
pipe.
- Lock it in place using the front
fork fixing screw.
4. As shown in the figure:
- Insert the guardrail bracket into the
seat tube, then fix it with screws.
8